Print page | Email
item to a friend
This item has been
sold |
Item Category: |
Power Amplifiers |
Make: |
McIntosh |
Model: |
MC402 |
Age: |
2
years
0
months |
Condition (?): |
10/10 |
Voltage: |
230V 50Hz |
Price New (if known): |
£
8500 |
Choice Hi-fi price: |
£
3850 |
Conditions of payment: |
Fixed |
Image
(
actual
)
:
click on the image to view original size |
|
Image
(
actual
)
:
click on the image to view original size |
|
Additional Details:
For Sale if my McIntosh MC402 Power Amplifier in mint condition complete with original manual and Packaging.
Producing a minimum 400 watts per channel in stereo, 800 watts in mono, the MC402 delivers power that is fully balanced from input to speaker output. The extraordinary quad-differential design of the MC402 actually consists of four complete amplifier circuits. Each channel contains two amplifier circuits, each the mirror image of the other, whose outputs are combined in the unique McIntosh Output Autoformer® resulting in totally balanced operation from input to speaker output and the cancellation of virtually all noise and distortion. The exclusive McIntosh Output Autoformer® is a handcrafted matching device that provides an ideal impedance match for all speaker types regardless of their rated impedance. Any departure from an optimum impedance match increases stress on the amplifier which threatens a rise in distortion as well as a reduction in the life expectancy of the amplifier. McIntosh Output Autoformers® enable the MC402 to operate at maximum efficiency and to always deliver full power, without stress, to any type of loudspeaker.
Specifications
Power Output Stereo
Minimum sine wave continuous average power output per
channel, all channels operating is:
400 watts into 2 ohm load
400 watts into 4 ohm load
400 watts into 8 ohm load
Power Output Mono Parallel
Minimum sine wave continuous average power output is:
800 watts into 1 ohm load
800 watts into 2 ohm load
800 watts into 4 ohm load
Output Load Inpedance
2, 4 or 8 ohms (Stereo Mode)
1, 2 or 4 ohms (Mono Mode)
Rated Power Band
20Hz to 20,000Hz
Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power
level from 250 milliwatts to rated power output is
0.005%
Intermodulation Distortion
Maximum Intermodulation Distortion if instanta-
neous peak output per channel does not exceed
twice the rated output, for any combination of fre-
quencies from 20Hz to 20,000Hz, with all channels
operating is 0.005%
Dynamic Headroom
2.1dB
Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
Sensitivity
2.0 Volts Unbalanced Input
4.0 Volts Balanced Input
A-Weighted Signal To Noise Ratio
94dB Unbalanced (120dB below rated output)
98dB Balanced (124dB below rated output)
Input Impedance
10,000 ohms Unbalanced Inputs
20,000 ohms Balanced Inputs
http://www.drhifi.net.au/Used%20Equipment/McIntosh/MC402/MC402.pdf
http://www.audioreview.com/cat/amplification/amplifiers/mcintosh/mc402/prd_347917_1583crx.aspx
Contact Choice Hi-Fi to purchase this item
>>>
<<Back
|